久隆高功率塑胶熔接机技术参数
主要技术参数如下:
型 号: JL-1532 工作频率(KHZ):15KHZ
Model:JL-1532 JL-1542 Working frequency (KHz): 15
输出功率(W): 3200 熔接时间( s ) : 0.01-9。99
Output power (W): 3200 Welding time (s): 0.01-9.99
延迟时间( s ): 0.01-9。99 硬化时间( s ): 0.01-9。99
Delay time (s): 0.01-9.99 Hardening time (s): 0.01-9.99
输入电压: AC 220V/50Hz 工作气压(Mpa): 0.2--0.8
Input voltage: AC 220V/50Hz Working air pressure (MPa): 0.2-0.8
焊头行程(mm):175 工作焊头(mm): L200×W10
Welding head stroke (mm): 175 Working welding head (mm): L200*W10
外形尺寸 (mm):L850×W610×H1850 净 重(KG):185
Dimensions (mm): L850*W610*H1850 Net weight (KG): 185
一.青岛超声波塑料焊接机工作原理及应用:
超声波塑料焊接机在焊接塑料制品时,既不要添加任何粘接剂、填料或溶剂,也不消耗大量热源,具有操作简便、焊接速度快、焊接强度高、生产效率高等优点。因此焊接技术越来越广泛地获得应用。
当超声波作用于热塑性的塑料接触面时,会产生每秒万次的高频振动,这种达到一定振幅的高频振动,通过上焊件把超声能量传送到焊区,由于焊区即两个焊接的交界面处声阻大,因此会产生局部高温。又由于塑料导热性差,一时还不能及时散发,聚集在焊区,致使两个塑料的接触面迅速熔化,加上一定压力后,使其融合成一体。当超声波停止作用后,让压力持续几秒钟,使其凝固成型,这样就形成一个坚固的分子链,达到焊接的目的,焊接强度能接近于原材料强度。
二、久隆设备特点:
1、使用台湾原装振动器,效率高,出力超强。
2、四点平衡式水平调整设计,校模迅速。
3、多功能型机种,可熔接,点焊,埋植,铆接,成型,切除。
4、精密型指拨开关,调整方便,准确度高。
5、自动补偿回授控制线路,可长时间使用。
6、开机即可使用,不用预热,快速又方便。
7、可配合自动化机台或制袋机用,增加生产能力。
The main technical parameters are as follows:
Model number: JL-1532 Working frequency (KHZ): 15KHZ
Model:JL-1532 JL-1542 Working frequency (KHz): 15
Output power (W): 3200 Splicing time (s): 0.01-9.99
Output power (W): 3200 Welding time (s): 0.01-9.99
Delay time (s ): 0.01-9.99 Hardening time (s ): 0.01-9.99
Delay time (s): 0.01-9.99 Hardening time (s): 0.01-9.99
Input voltage: AC 220V/50Hz Working pressure (Mpa): 0.2--0.8
Input voltage: AC 220V/50Hz Working air pressure (MPa): 0.2-0.8
Welding head stroke (mm): 175 Working welding head (mm): L200×W10
Welding head stroke (mm): 175 Working welding head (mm): L200*W10
Dimensions (mm): L850×W610×H1850 Net weight (KG): 185
Dimensions (mm): L850*W610*H1850 Net weight (KG): 185
1. Working principle and application of ultrasonic plastic welding machine:
When welding plastic products, the ultrasonic plastic welding machine neither adds any adhesive, filler or solvent nor consumes a large amount of heat source. It has the advantages of simple operation, fast welding speed, high welding strength and high production efficiency. Therefore, welding technology is more and more widely used.
When ultrasonic waves act on the thermoplastic plastic contact surface, high-frequency vibrations of ten thousand times per second will be generated. This kind of high-frequency vibration with a certain amplitude will transmit ultrasonic energy to the welding area through the upper weldment. Because the welding area is two The acoustic resistance is large at the welding interface, so local high temperature will be generated. In addition, due to the poor thermal conductivity of the plastic, it cannot be distributed in time for a while, and it gathers in the welding area, causing the contact surface of the two plastics to melt rapidly, and after a certain pressure is applied, they merge into one. When the ultrasonic stops, let the pressure continue for a few seconds to make it solidify and shape, so that a strong molecular chain is formed to achieve the purpose of welding, and the welding strength can be close to the strength of the raw material.
2. Features of Jiulong equipment:
1. Use Taiwan original vibrator, high efficiency and super output.
2. Four-point balanced level adjustment design, rapid model calibration.
3. Multifunctional model, which can be welded, spot welded, embedded, riveted, formed and cut.
4. Precise dial switch, easy to adjust and high accuracy.
5. Automatically compensate the feedback control circuit, which can be used for a long time.
6. It can be used immediately after starting up, no need to preheat, fast and convenient.
7. It can be used with automatic machines or bag making machines to increase production capacity.